Sundance Spas 680 User Manual download pdf (Page 18)

Page 14

7.0 Spa Fill Up Procedure

FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY

BEFORE PROCEEDING WITH THAT STEP.

1. Prepare The Spa For Filling

•

Clear all debris from the spa. (Although the spa shell has been

polished at the factory, you may want to treat it with a specially

formulated spa cleaner. Consult your authorized Sundance

dealer for additional information prior to filling spa.

• Remove filter/skimmer lid (page 20), then remove filter cartridge

as outlined in section 11.1 (page 25).

Fill Spa

• Place the end of your garden hose into the empty filter bucket.

CAUTION: Never fill with water from a water softener. If your

water is extremely “hard”, it is preferable to fill half-way with

hard water and the rest of the way with softened water. Or,

you may fill entirely with hard water if you use a special water

additive available from your authorized Sundance dealer.

• Fill spa with clean tap water from garden hose until water covers

all jets (DO NOT OVERFILL!)

IMPORTANT:

Always fill your spa through the filter bucket

after draining. Failure to do so may cause air to be trapped

in either pump, preventing the pump from circulating water.

Remove the hose and replace the filter cartridge. Note: DO

NOT overtighten filter cartridge, finger tight only!

3. Turn On Power

Turn on power to spa at the home’s circuit breaker. The heater

and filter pump will automatically activate. If the control panel LCD

flashes water temperature and “COOL” or “ICE”, refer to page 31 for

additional information.

4. Activate Jets Pump 1

Depress the JETS 1 button on the control panel once

to activate jets pump #1. On Burlington models, press

JETS 2 button to activate jets pump #2.

JETS 1

JETS 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

No comments

Sundance Spas 680 User Manual Page 18