Sundance Spas 680 User Manual download pdf (Page 28)

Page 24

Standard Filtration/Heating Modes (F1 - F3)

F1 4 hours of filtration/heating per day (one 2-hour cycle

every 12 hours).

F2 6 hours of filtration/heating per day (one 2-hour cycle

every 8 hours).

F3 8 hours of filtration/heating per day (one 2-hour cycle

every 6 hours).

Economy Filtration/Heating Modes (F4 - F6)

F4 4 hours of filtration/heating per day (one 2-hour cycle

every 12 hours).

F5 6 hours of filtration/heating per day (one 2-hour cycle

every 8 hours).

F6 8 hours of filtration/heating per day (one 2-hour cycle

every 6 hours).

Lock Modes (L1 - L2)

L1 Lock Out (disables all spa functions to permit filter

cleaning).

L2 Lock Mode (disables the jets and light buttons to prevent

unauthorized use of spa). Filtration/heating cycle will

continue to operate as programmed in this mode. The

temperature display flashes when this function is

enable. Example: the “F3” filtration/heating cycle was

enabled prior to choosing lock mode. The spa continues

to perform the “F3” cycle until lock mode is canceled, allowing

another cycle to be selected.

Filter Cycle Setup Example

To set a time for the first filtration/heating cycle, simply turn power on to

the spa two minutes prior to the desired time. EXAMPLE: If you desire

your first filtration/heating cycle to begin at 10:00 AM turn off power

to the spa and turn it back on again at 9:58 AM. Note: start time is

approximate and may vary slightly from day to day.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

No comments

Sundance Spas 680 User Manual Page 28